Siemens SINAMICS SIMOTICS S200 PROFINET - Page 198

Description of function
Figure7-14 Control and status word
The control and status word is indicated by all sequence control states. This also includes
stat
es that are not available, which prevent the motor from being switched on and switched
o󹪜. Diagnostics supports fault analysis.
Commissioning (web server)
7.4Functions and menus
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
196 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB