Siemens SINAMICS SIMOTICS S200 PROFINET - Cybersecurity Information

2.4 Cybersecurity information
Siemens provides pr
oducts and solutions with industrial cybersecurity functions that support
the secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
cybersecurity concept. Siemens’ products and solutions constitute one element of such a
concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. 󹪝rewalls and/or network segmentation)
are in place.
For additional information on industrial cybersecurity measures that may be implemented,
please visit
https://www.siemens.com/cybersecurity-industry.
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customer’s exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Cybersecurity
RSS Feed under
https://new.siemens.com/cert.
Further information is provided on the Internet:
Industrial Cybersecurity Con󹪝guration Manual (
https://
support.industry.siemens.com/cs/ww/en/view/109810578)
WARNING
Unsafe operating states resulting from software manipulation
Softwar
e manipulations, e.g. viruses, Trojans, or worms, can cause unsafe operating states in
your system that may lead to death, serious injury, and property damage.
• Keep the software up to date.
• Incorporate the automation and drive components into a state-of-the-art, integrated
industrial cybersecurity concept for the installation or machine.
• Make sure that you include all installed products in the integrated industrial cybersecurity
concept.
• Protect 󹪝les stored on exchangeable storage media from malicious software by with suitable
protection measures, e.g. virus scanners.
• Carefully check all cybersecurity-related settings once commissioning has been completed.
Fundamental safety instructions
2.4Cybersecurity information
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 35