Siemens SINAMICS SIMOTICS S200 PROFINET - Fundamentals; Supported Operating Units; Requirements for Commissioning; Supported Browsers

7.2 Fundamentals
7.2.1 Support
ed operating units
Description
The following operating units are supported for the connection with the web server:
• Programming device, PC, notebook
• Smartphone, tablet PC
Mobile devices can be connected to the converter via third-party Ethernet OTG adapters or
external WLAN access points.
As a result of the responsive design, content is adapted to the screen size of the operating
unit.
7.2.2 Requirements for commissioning
Description
• You have correctly installed the converter and the motor.
• You have attached the motor including encoder to the mechanical system.
• You have connected the motor to the converter.
• You have connected the converter and the operating unit via service interface X127 or
PROFINET interface X150.
• You have switched on the converter supply voltage.
• The converter has ramped up.
7.2.3 Supported browsers
Description
Table 7-1 Browsers supported by the web server
Browser
1)
Version
Apple Safari ≥ Version 15.0
Google Chrome ≥ Version 83
Microsoft Edge ≥ Version 88
Mozilla Firefox ≥ Version 91
1)
Siemens r
ecommends t
hat y
ou use the latest version of the browsers.
Commissioning (web server)
7.2Fundamentals
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
164 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB