Siemens SINAMICS SIMOTICS S200 PROFINET - Page 200

The parameter list o󹪜ers the f
ollowing options:
• Toggling between two list views
– Show as "Simple view" and "Advanced view" with parameter numbers
• Managing user-de󹪝ned parameter lists
– Create a user-de󹪝ned parameter lists
– Copy the selected parameters to a designated user-de󹪝ned parameter list
– Import and export user-de󹪝ned parameter lists
• Searching parameters
– Search by parameter number or text search within parameter names
• Filtering the parameter list
– Parameter groups: Only show the parameters that are assigned to a particular function.
– Parameter types: display and/or setting parameters
• Changing parameter values directly in a parameter list
– Exception: blocked parameters
p Setting parameters Are read/write.
The setting parameter can only be parameterized in the active
commissioning mode.
Depending on the parameter, changes are
possible in the quick setup.
The setting parameter can only be parameterized when the user
has the appropr
iate function rights.
r Display parameters Can only be read and cannot be edited.
c Display parameters Can only be read and cannot be edited.
Commissioning (web server)
7.4Functions and menus
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
198 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB