Siemens SINAMICS SIMOTICS S200 PROFINET - Page 333

Description of function
Table 10-7 I&M data
I&M data Format Explanation Example for the
cont
ent
I&M0 u8[54] PR
OFINET Converter-speci󹪝c data, read onl
y See below
I&M1 Visible String [32] Plant/system identi󹪝er "ak12-ne.bo2=fu1"
Visible String [22] Location code "sc2+or45"
I&M2 Visible String [16] Date "2013-01-21 16:15"
I&M3 Visible String [54] Any comment or remark -
I&M4 Octet String[54] Check signature to track changes for Safe‐
ty Int
egr
ated.
Values of r9781[0]
and r9782[0]
When requested, the converter transfers its I&M data to a higher-level control or to a PC/PG
with inst
alled TIAPortal.
Table 10-8 I&MO
Designation Format Example for the content
MANUFACTURER_ID u16 42dhex (=Siemens)
ORDER_ID Visible String [20] "6SL3246-0BA22-1FA0"
SERIAL_NUMBER Visible String [16] "T-R32015957"
HARDWARE_REVISION u16 0001hex
SOFTWARE_REVISION char, u8[3] "V" 04.70.19
REVISION_COUNTER u16 0000hex
PROFILE_ID u16 3A00hex
PROFILE_SPECIFIC_TYPE u16 0000hex
IM_VERSION u8[2] 01.02
IM_SUPPORTED bit[16] 001Ehex
Functions
10.3Fieldbus communication
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 331