Siemens SINAMICS SIMOTICS S200 PROFINET - Page 471

25 X205 
40 X400 
41 X401 
42 X402 
50 X500 
51 X501 
52 X502 
53 X503 
54 X504 
55 X505 
56 X506 
57 X507 
Cause: Internal communications faulted.
Remedy: - Carry out a POWER ON (switc
h-o󹪜/switch-on).
- Replace t
he device.
A01486 Topology: Component not connected
Message class: Error in the parameterization / con󹪝guration / commissioning pr
ocedure (18)
Message value: Component: %1, to %2, %3, connection: %4
Component: None
Response: NONE
System messages
12.3Faults and alarms
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 469