14.2 Technical data of the motor
14.2.1 General t
echnical data
Technical data
Table 14-11 General technical data of the motor
Property Description
Type of motor Servo motor
Rotor inertia
• 1FL21: motor with low rotor inertia
• 1FL22: mot
or with medium rotor inertia
• 1FL23: motor with high rotor inertia
Cooling Natural cooling
Thermal class
• 1FL2102, 1FL2☐03, 1FL23☐☐: B
•
1FL2104, 1FL2204, 1FL2☐05: F
Impulse v
oltage insulation class (IVIC) accord‐
ing toIEC/EN60034‑18‑41
C
Operating t
emperature -15°C...+40°C, power derating at higher temperatures
Relative humidity < 90% at 30 °C, condensation not permissible
Installation altitude according toEN60034‑6 ≤ 1000m above sea level; otherwise power derating
Type of construction according to
IEC/EN60034‑7
IM B5 (IM V1, IM V3)
Degree of protection according to
IEC/EN60034‑5
• 1FL2102, 1FL2☐03, 1FL2104, 1FL2204:
IP54
for
the shaft extension (without shaft sealing) and IP65 for the motor
body, optionally IP65 for the whole motor (with shaft sealing)
• 1FL2☐05, 1FL23☐☐:IP65
Temperature monitoring Thermal motor model
Paint nish Anthracite (614 Anthrazit)
Shaft extension according toDIN748‑3
andIEC60072‑1
Plain shaft, optionally shaft with feather key (half-key balancing)
Radial eccentricity, concentricity, and axial ec‐
centr
icity according t
oDIN42955 and
IEC60072‑1
Tolerance N (normal)
Vibration severity grade according to
IEC/EN60034‑14
Grade A
Sound pressure level L
pA
(1 m) accor
ding
toDINENISO 1680, max. t
olerance +3dB(A)
• 1FL2102, 1FL2☐03, 1FL2104, 1FL2204:60dB(A)
• 1FL2☐05, 1FL2304:65dB(A)
• 1FL2306, 1FL2310:70dB(A)
Encoder
• Absolute encoder single-turn, 17-bit (identication letter
: H)
• Absolute encoder single-turn, 21-bit (identication letter: S)
• Absolute encoder, 21-bit single-turn + 12-bit multiturn (identication let‐
ter: M)
Technical data
14.2Technical data of the motor
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 623