Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

European RoHS Directive
The motor
s comply with Directive 2011/65/EU regarding limiting the use of certain
hazardous substances.
European EMC Directive
The compliance of the motors with the regulations of the Directive 2014/30/EU has been
veri󹪝ed through full compliance with the IEC/EN 61800-3.
European Directive on Waste Electrical and Electronic Equipment (WEEE)
The motors comply with the 2012/19/EU directive on taking back and recycling waste
electrical and electronic equipment.
Underwriters Laboratories (North American market)
The motors provided with the test symbol displayed ful󹪝ll the requirements stipulated for the
North American market.
UKCA certi󹪝cation
The motors comply with the requirements for the market in Great Britain (England, Wales and
Scotland).
Eurasian Conformity
The motors comply with the requirements of the Russia/Belarus/Kazakhstan customs union
(EAC).
Registration, Evaluation and Authorization of Chemicals
The motors comply with the requirements of Registration, Evaluation and Authorization of
Chemicals (REACH).
China RoHS
The motors comply with the requirements of China RoHS. You can 󹪝nd additional information
on the Internet:
China RoHS (https://support.industry.siemens.com/cs/ww/en/ps/29685/cert)
Quality syst
ems
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO14001.
China Energy Label
The motors ful󹪝ll the China Energy Label Grade 2 according to GB 30253-2013.
Table 3-14 Speci󹪝cations of China Energy Label
Name of the standard Minimum allowable values for energy e󹪟ciency and ener
gy
e󹪟ciency
clas
s of permanent‑magnet synchronous motors (GB30253-2013)
Date of entry into force July 1, 2020
A󹪜ected mo
tor
s Permanent‑magnet synchronous motors (without incorporated brake)
with a rated power of 0.55 kW to 90 kW and a rated speed of 500 r/min
to 3000 r/min driven by variable‑frequency equipment on a power sup‐
ply below 1000 V.
Description
3.5Directives and standards
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 75

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English