Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

Note
To be observ
ed for devices used in Category C3
In a residential environment this product may cause radio-frequency interference.
• Do not use this device in the 󹪝rst environment (residential area).
Note
Com
pl
ying wit
h Category C2 interference emission
When using a cable of more than 3 m to connect the converter to the PROFINET or Ethernet
interface, electromagnetic interferences may occur. Use appropriate ferrite clamps, cabinet
feedthrough, or 󹪝ber optic transceivers to minimize the interference emission.
Note
The conducted and radiat
ed emissions of the PROFINET ports are in compliance with the
standards of IEC 61800‑6‑8, Class A (CISPR 32), and IEC 61800‑3 Category C3.
Application planning
4.8EMC-compliant installation
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 97

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English