CONF600 PLUS – User’s Manual
12.8
First, download the configuration from the PDA to the controller, and then use the CONF600 Plus to
upload the configuration from the controller to the PC. To upload the configuration list, open the
Online dialog box, select the controller by its information address and click the Upload button. See
the section Uploading the device configuration for further details.
The values of the block parameters and the links between the blocks will be uploaded from the
controller to the Block List.
The controller does not save the graphical representation of the configuration. It will be necessary to
drag the blocks to the drawing area.
Look Edition
Go to the Edit menu and click Lock Edition. When this option is selected with the check mark, ,
the user will not be able to edit the drawing area and the project configuration.
To Next Page
Loading...
