Spectra Precision Focus 30 - Page 179

Chapter 5
Maintenance and Repair
P/N 79000035_SM, Version 1.5 5 - 49 Focus 30/35 Service Manual
Fig. 5-40 Clamp the Tension gear
3 Assemble the Base
part.
A. Insert the Base part
in alidade until the
pinion of coarse
motor fits into the
Tension gear.
B. Thread the Cable
ACB Hz-MCB in
the opening of
alhidade.
C. Fix the Base part
with four screws.
D. Remove the
Clamping tool
through the
opening.
The Clamping tool
has to be on the Side
cover left side of the
alidade.
200Ncm/16,7lbfin
Item Performance Action Result Notes
A
B
C
Plier
D