Spectra Precision Focus 30 - Page 272

Chapter 6
Adjustment and Verification
Focus 30/35 Service Manual 6 - 18 P/N 79000035_SM, Version 1.5
Fig. 6-11 Check HA / VA collimation - CV value out of tolerance
Answering
No a second
message box appears to
adjust the reticle with the
Front lens mirror tool, see
Fig. 6-12 on page 6-19
and go to see “Adjustment
of Reticle F30 in Hz and V
direction with Front lens
mirror tool” on page 6-
34.
No correction
values will be
stored in to the
MCB board
memory.
No component of the
angle system was
disassembled or
partly replaced.
Item Performance Description Result Notes