Spectra Precision Focus 30 - Page 333

Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 79 Focus 30/35 Service Manual
2 Start the EDM offset
determination.
Select EDM offset
determination from EDM
High Precision
in
Maintenance & Service.
3 Select Baselines.
Note – If baselines
already have been
selected, jump to item
6.
A. Select
Select
Baselines check box.
B. Click
Baselines
button.
The dialogue
Baseline
Selection
appears, see Fig.
6-66 on page 6-
81 .
Fig. 6-65 EDM offset determination
Item Performance Action Result Notes