Event Code Message Text and Description Details and Solution
2054
An open bottom cover was
detected and the robot
movement has been stopped.
Ensure that the bottom cover is
completely inserted and properly
locked. Do not open bottom cover
using the emergency release while
the library is operating and the robot
is moving.
2055
An open unit lock was
detected and the robot
movement has been stopped.
Ensure that all unit locks are
properly locked. Do not open unit
locks using the emergency release
while the library is operating and the
robot is moving.
2056
Initialization failure due to
picker push pull positioning
error.
Check for obstructions in the
horizontal pathway of the robotic
assembly such as a cartridge sticking
out or a cable impeding progress.
2057
Robotic shipping lock in
incorrect position.
Access the picker assembly and
manually move the shipping lock
lever to either a locked or unlocked
position. After moving the shipping
lock to the one of the correct
positions, reboot the library.
2058
Maximum temperature for
Drive Power Board 1 has
exceeded. Shutting down the
system.
Check the chassis fan and replace the
fan if defective. See the Spectra Stack
Fan Replacement Instructions.
2059
Maximum temperature for
Drive Power Board 2 has
exceeded. Shutting down the
system.
Check the chassis fan and replace the
fan if defective. See the Spectra Stack
Fan Replacement Instructions.
2060
Chassis CPU maximum
temperature exceeded.
Shutting down the system.
Check the chassis fan and replace the
fan if defective. See the Spectra Stack
Fan Replacement Instructions.
2061
Move failed pulling cartridge
from drive.
Check for labels or cartridge
misalignments that would prevent
the cartridge from coming out of the
drive.
JANUARY 2023 237
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 9 - EVENT CODES
To Next Page
Loading...
