Spectra Stack Tape Library - Page 244

Event Code Message Text and Description Details and Solution
4025
Library test failed due to a
cartridge error.
1. Remove the cartridge and
inspect it for damage.
2. Retry the operation with
another cartridge.
4027
Library Test failed due to a
cartridge error.
4028
Drive cannot use this media
due to it being an unknown or
unsupported format. Possibly
the media is the wrong
generation of media.
Check that the LTO generation of the
tape cartridge is the same generation
indicated on the barcode label.
Remove cartridges which are not
compatible to your tape drives.
4029
Incompatible media move
operation blocked by media
barcode ID check.
Check if Media barcode label is
matching LTO generation. Replace
label or remove incompatible media
from your system.
4030
Move cartridge operation
failed due to media error.
Remove the cartridge and inspect it
for damage. Retry the operation with
another cartridge.
4031
Exchange media failed due to
media error.
Remove the cartridge and inspect it
for damage. Retry the operation with
another cartridge.
4041
Wellness test failed because of
power supply redundancy test
failed.
Ensure all power supplies are
installed properly (two per module),
and that each power supply is
connected to a valid power source.
4044
One of the Library tests failed
because of a source element or
destination element is
currently not accessible.
Contact Spectra Logic Technical
Support. See Contacting Spectra
Logic on page11.
4054
Chassis fan failed. Check the chassis fan and replace the
fan if defective. See the Spectra Stack
Fan Replacement Instructions.
JANUARY 2023 244
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 9 - EVENT CODES