EasyManua.ls Logo

SpectraLink IP-DECT 200 - Page 102

SpectraLink IP-DECT 200
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14215700-IG, Edition 8.0
April 2018, Original document
102
Field Setting
Send all messages to current
registrar (Optional)
If enabled, all non-REGISTER requests to the current
registrar will be sent, when more proxies are available.
Registration expire(sec) The maximum time between re-registrations. The regis-
trar can signal a shorter time-out.
Default value: 3600 sec
Handset power off action
(Optional)
Action performed when a handset is turned off.
Possible values: Ignore or De-register.
If De-register is selected, the handset will de-register
when turned off.
Default value: Ignore
Max forwards The maximum number of proxies outgoing messages are
allowed to traverse.
Default value: 70
Client transaction timeout
(msec)
Client transaction time-out. This controls timer B and F
as specified in RFC3261. Increase this to eliminate time
out errors or decrease it to reduce fail over time.
Default value: 16000 msec
SIP type of service (TOS/Diff-
serv)
TOS/Diffserv used for SIP signaling. Entered in decimal.
Default value: 96 (AF - Assured Forwarding)
SIP 802.1p Class-of-Service This is the 802.1p PCP and must be between 0 and 7.
The setting requires VLAN tagging.
Default value: 3
GRUU (Optional) If enabled, Globally Routable User Agent URIs are sup-
ported.
Default value: Enabled
Use SIPSURI (Optional) Normally, SIP communication on a TLS connection uses
the SIPS: URI scheme.
Disabling this option causes the Wireless Server to use
the SIP: URI scheme with a transport=tls parameter for
TLS connections.
Default value: Disabled
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Table of Contents

Other manuals for SpectraLink IP-DECT 200

Related product manuals