Field
Wireless Server Configuration - DECT
Subscription allowed (Optional) If enabled, it is possible to subscribe new handsets to the
system.
Authenticate calls (Optional) If enabled, each individual DECT call will be authen-
ticated.
Encrypt voice/data (Optional) Encryption of voice/data packets transmitted via DECT.
Possible values: Disabled, Enabled or Enforced (non
GAP).
Default value: Disabled
System access code (Optional) System wide DECT access code.
The access code is from 0 - 8 decimal digits.
Note: Individual user access code (AC) has precedence
over system access code.
Send date and time (Optional) If enabled, date and time will be sent to the handsets when
a call is terminated.
Default value: Enabled
System TX power (Optional) Used for controlling (reducing) the output power of all con-
nected base stations supporting power control. Unless set
to default, this will override any base station specific power
setting.
Default value: Default (250 mW)
Note: It is possible to define a TX power value for a spe-
cific base station (Administration > Base Station).
Wireless Server Configuration - Media resources (Not relevant to the Spectralink IP-DECT
Server 200/400)
Allow new (Optional) If enabled, new media resources are allowed to connect to
the server.
Add new as active (Optional) If enabled, new media resources will become active when
added. Otherwise they must be activated manually under
Administration > Media Resource > Media Resource
page.
To Next Page
Loading...
