14215700-IG, Edition 8.0
April 2018, Original document
37
Service Codes - Spectralink IP-DECT Server
It is possible to access the Spectralink IP-DECT Server in operation using a handset.
Use any handset and enter ***999* followed by a 2-digit code for the information you wish to
retrieve, and then press off-hook.
Access basic information such as:
l IP address - enter ***999*00
l MAC addres - enter ***999*01
l Server firmware ***999*02
Note:
If UPnP is enabled, all Spectralink IP-DECT Servers can be identified on the network by
their serial number. For more information, see "Discovering the Spectralink IP-DECT
Components via UPnP" on page87.
The serial number can be found on the label on every Spectralink IP-DECT Server. For
more information, see "Identifying ARI on Spectralink IP-DECT Server" on page48.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
To Next Page
Loading...
