Field Setting
SIP Configuration - General
Local port Enter the local port number.
The local port is the port on which the Spectralink IP-DECT
Server listens for incoming SIP-signalling.
The default local port number is 5060.
Transport Transport mechanism used for SIP messages.
Possible values: UDP, TCP or TLS.
Note: If TLS is used as SIP Transport Method, it is necessary
to import host certificate and CA certificates into the server.
For more information, see "Configuring Certificates" on
page116.
DNS method Used for looking up the destination of SIP messages.
Possible values: A records or DNS SRV.
Default domain Used for SIP registration. Enter the name of the domain.
Note: If no user specific domain is configured under a spe-
cific user, the handsets registered on the Spectralink IP-
DECT Server will use the default domain as the domain part
of the SIP URI;
e.g. John Doe <sip:1234@example.org>
If only one SIP PBX is used and no domain is available, enter
the IP address of PBX here.
Register each endpoint on sep-
arate port (Optional)
If enabled, separate local ports for each endpoint are used,
instead of the global local port.
Send all messages to current regis-
trar (Optional)
If enabled, all non-REGISTER requests to the current regis-
trar will be sent, when more proxies are available.
Registration expire(sec) The maximum time between re-registrations. The registrar
can signal a shorter time-out.
Default value: 3600 sec
Handset power off action
(Optional)
Action performed when a handset is turned off.
Possible values: Ignore or De-register.
If De-register is selected, the handset will de-register when
turned off.
Default value: Ignore
To Next Page
Loading...
