SpectraLink IP-DECT 200 - Signing into a Device from the Handset; Signing out from a Device from the Handset

14215700-IG, Edition 8.0
April 2018, Original document
208
Signing into a Device from the Handset
When accessing the Sign in menu, you can choose between PINSign in or Sign in (PIN Sign in is
only visible if PIN authentication is available and configured on the server of the call handler, e.g.
Skype for Business).
1. When in idle mode, access the Sign in menu by using either Sign in/out shortcut or long-press
key 9.
2. If selecting PIN Sign in:
l Enter number and click OK.
l Enter PIN, and click OK.
3. If selecting Sign in:
l Enter user and click OK.
l Enter password, and click OK.
4. The handset is now ready for use.
Signing out from a Device from the Handset
1. When in idle mode, sign out by using either Sign in/out shortcut or long-press key 9.
2. Select Sign out and click OK.
Note:
If supported by the handset the following lists are cleared in the handset, after a suc-
cessful sign-in/sign-out:
l Incoming/outgoing/missed calls list
l Incoming/outgoing message list
l Task list
l Message template list
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide