SpectraLink IP-DECT 200 - Configuration Steps Overview; Minimum Steps for System Configuration

14215700-IG, Edition 8.0
April 2018, Original document
82
Configuration Steps Overview
Below is an overview of the steps to follow in order to configure the Spectralink IP-DECT Server solu-
tion after having installed all system components and completed all pre-configuration tasks.
After following these steps, you will be able to make calls between handsets:
1. Power up the Spectralink IP-DECT Server and Spectralink DECTMedia Resource (if used).
For more information, see "Installing the Spectralink IP-DECT Server 200" on
page49,"Installing the Spectralink IP-DECT Server 400" on page54 and "Installing the Spec-
tralink IP-DECT Server 6500 and Spectralink DECTMedia Resource" on page55 .
2. Change the IP address of the Spectralink IP-DECT Server.
For more information, see "To Configure a Static IP Address and Other Network Settings" on
page93.
3. Power up the Spectralink IP-DECT Base Station.
For more information, see "Installing the Spectralink IP-DECT Base Station" on page62.
Note:
Not relevant to the Spectralink IP-DECT Server 200.
4. Change the IP address of the Spectralink IP-DECT Base Station.
For more information, see "To Configure a Dynamic IP address" on page92.
Note:
Not relevant to the Spectralink IP-DECT Server 200.
5. Configure the Spectralink IP-DECT Base Station with the address of the Spectralink IP-
DECT Server.
For more information, see "Assigning Server Address to Spectralink IP-DECT Base Station
and Spectralink DECTMedia Resource" on page123.
Note:
Not relevant to the Spectralink IP-DECT Server 200.
6. SIP registration - configure the settings for the IP-PBX (Configuration > SIP). Remember to
reboot the server.
For more information, see "Configuring SIP and IP-PBX Settings" on page101.
7. Register/create users and enter values for user name, authentication user and authentication
password (depending on PBX type).
For more information, see "Handset Management" on page143.
8. Subscribe handset.
For more information, see "Registering Users and Subscribing Spectralink DECT Handsets"
on page139.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide