Field Setting
Update firmware - Firmware file
Click Browse to browse for the relevant firmware file.
Enable the Use firmware as default check box if you want the
server firmware as default for all base stations and media
resources (recommended).
Click Update to update the firmware file.
Field Setting
Update media resource firmware - Default
PCS Information about default firmware file version (PCS) - if a firm-
ware file has been uploaded.
Note: Once uploaded, default firmware will remain on the
server until overwritten.
Note: If the Use firmware as default check box on the
Update firmware page is enabled (Firmware > Wireless
Server or Configuration > Provisioning > Firmware), then
the server firmware is uploaded as default for all base stations
and media resources (recommended). For the files to be
updated in the media resource, this must be executed either
through manual update or automatic update.
Build Information about the build number of default firmware file - if a
default firmware file has been uploaded.
To Next Page
Loading...
