Field
Media Resource - General
IP address (Read only) Current IP address of the media resource.
Description (Optional) Enter a description.
It is recommended to use a description of the physical loc-
ation.
Cluster Default value: Default
It is possible to cluster devices that are located at the same
location.
To assign a cluster to the media resource, select the relevant
cluster from the list.
For information about defining clusters, see "Configuring
Clusters" on page118.
Disabled (Optional) If enabled, the media resource will be disabled.
Note: If Add new as active is enabled (Configuration >
Wireless Server > Media resources), then this will be
unset by default when adding a new media resource.
To Next Page
Loading...
