EasyManua.ls Logo

SpectraLink IP-DECT 200 - User Sign-in;Sign-out Procedures

SpectraLink IP-DECT 200
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14215700-IG, Edition 8.0
April 2018, Original document
201
User Sign-in/Sign-out
Using a sign-in procedure, it is possible to sign-in to the device and sign-out from the device from the
handset instead of performing user administration from the web based Administration Page of the
Spectralink IP-DECT Server. The advantage is, that no trusted server is required and no need for
server user database synchronization to the Active Directory.
To utilize this feature, both handset sharing and handset login must be enabled.
Note:
This feature requires handset firmware PCS17H or newer.
Note:
When a sign-in/sign-out is in progress the handset will wait 120 seconds for user input. If
no user input is received, the process will be aborted, and the handset will return to the
state it was in before the sign-in/sign-out was initiated.
If a sign-in/sign-out is initiated while the user is busy, the sign-in will not be allowed.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Table of Contents

Other manuals for SpectraLink IP-DECT 200

Related product manuals