EasyManua.ls Logo

SpectraLink IP-DECT 200 - Server and Media Resource LED Indicators

SpectraLink IP-DECT 200
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14215700-IG, Edition 8.0
April 2018, Original document
56
Server and Media Resource LED Indicators
Below you will find information about LED indicators on the Spectralink IP-DECT Server 6500 and
Spectralink DECTMedia Resource.
Front Faceplate
The Spectralink IP-DECT Server 6500/Spectralink DECTMedia Resource front cover has one indic-
ator describing the faults and failures of the device. The indicator is off when the Spectralink IP-
DECT Server 6500/Spectralink DECTMedia Resource is not powered. The LED flashes when the
Spectralink IP-DECT Server 6500/Spectralink DECTMedia Resource initializes. The indicator is on
when the Spectralink IP-DECT Server 6500/Spectralink DECTMedia Resource is operating.
LED Indicator Meaning
Steady green OK and idle.
Slow green flashing OK and active voice call.
Fast green flashing Active, in operation with the maximum active connections (busy).
Slow red flashing Missing media resource or base station (if it is a media resource:
missing connection to Spectralink IP-DECT Server 6500).
Fast red flashing Error
Steady red Reset/shutdown in progress.
Steady red for 5 seconds fol-
lowed by fast red flashing
Reset to factory settings.
Front LAN Port
LED Indicator Meaning
LINK Indicator - yellow Link layer software has established connection.
Activity Indicator - green flashing Activity
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Table of Contents

Other manuals for SpectraLink IP-DECT 200

Related product manuals