EasyManua.ls Logo

SpectraLink IP-DECT 200 - Configuration Overview - Spectralink IP-DECT Server; Licenses for Spectralink IP-DECT Server; Installing the Spectralink IP-DECT Server; Adding Handset Sharing License | IP-DECT;DECT Servers 400;6500;2500;8000

SpectraLink IP-DECT 200
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14215700-IG, Edition 8.0
April 2018, Original document
200
Adding Handset Sharing License | IP-DECT/DECT Serv-
ers 400/6500/2500/8000
To enable handset sharing it is necessary to add a Handset Sharing License | IP-DECT/DECT Serv-
ers 400/6500/2500/8000 to the Spectralink IP-DECT Server.
For more information about ordering and loading license into the server, see "Ordering Licenses" on
page43 and "Loading Licenses" on page43.
Note:
When a Handset Sharing License | IP-DECT/DECT Servers 400/6500/2500/8000 is
loaded and the Spectralink IP-DECT/DECT Server is rebooted, the web based Admin-
istration Page will display users differently than without a Handset Sharing License.
The Users menu will have a List Users submenu and a List Devices submenu. The
List users submenu is for SIP user data and the List devices submenu is for device
data.
Furthermore, the DECT access code which is used for securing DECT subscriptions is
handled differently depending on whether a Handset Sharing License | IP-DECT/DECT
Servers 400/6500/2500/8000 is present or not.
l Without handset sharing the DECT access code is part of the data for a specific
user.
l With handset sharing the DECT access code is not a part of the data for a specific
user, it is a part of the data for a specific device.
If a user specific DECT access code is configured before installing the handset sharing
license, the DECT access code will be used as device DECT access code and as (initial)
user pin code.
Both can, however, be changed independently of each other, if a license is present.
Configuration of Handset Sharing
Configuration of handset sharing consists of the following tasks to be completed:
l Configuration of user sign-in/sign-out
For more information, see "User Sign-in/Sign-out" on the next page.
l Adding Devices to Server
For more information, see "Adding Devices to Server" on page209.
l Adding Users to Servers
For more information, see "Adding Users to Server" on page212.
l Handset Sharing and Provisioning
For more information, see "Handset Sharing and Provisioning" on page213.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide

Table of Contents

Other manuals for SpectraLink IP-DECT 200

Related product manuals