SpectraLink IP-DECT 200 - Status - Wireless Server; Status - Packet Capture

14215700-IG, Edition 8.0
April 2018, Original document
225
Status - Wireless Server
Field
Wireless Server Status - General
Firmware version Wireless Server firmware version. E.g. 59015
System ARI E.g. 1005354651
Wireless Server Status - License information
License max users E.g. 30
License features E.g. Handset sharing, Enhanced Provisioning Interface,
Redundancy, Security, LAN Sync
Wireless Server Status - Service Status
Wireless Server Uptime Wireless Server uptime since last restart.
Call establishment Call establishment status. E.g. Allowed. Defined under
Administration > Wireless Server.
Subscription Subscription status. E.g. Allowed. Defined under Con-
figuration > Wireless Server.
Status - Packet Capture
Field Setting
Packet Capture - Filters
Capture SIP (Optional) If enabled, SIP signalling is captured.
Capture SIPS (decrypted)
(Optional)
If enabled, decrypted SIPS (TLS) signalling is captured.
Capture external RTP
(Optional)
If enabled, all voice packages from other endpoints are cap-
tured.
Capture internal RTP (Optional) If enabled, voice data between base stations is captured.
Capture MSF (Optional) If enabled, MSF signalling is captured.
Capture everything (Optional) If enabled, any kind of traffic is captured.
Custom filter (Optional) Enter a custom filter in PCAP filter format to capture traffic.
Packet Capture - Status
Status Shows the status of the capture progress.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide