SpectraLink IP-DECT 200 - Installing the Spectralink IP-DECT Server 6500 and DECT Media Resource

14215700-IG, Edition 8.0
April 2018, Original document
55
Installing the Spectralink IP-DECT Server
6500 and Spectralink DECTMedia
Resource
This section describes the appearance and components of the:
l Spectralink IP-DECT Server 6500/Spectralink DECTMedia Resource
The section also provides information about resetting the Spectralink IP-DECT Server/Spectralink
DECTMedia Resource hardware using the Reset button.
Note:
The installation of a Spectralink DECTMedia Resource with the Spectralink IP-DECT
Server 6500 is optional. Installation of a media resource will increase the number of sim-
ultaneous voice calls supported by a stand-alone server.
The Spectralink IP-DECT Server 6500 comes with one built-in media resource.
Before you install the equipment, ensure that a site planner defines the locations of the Spectralink
IP-DECT Server 6500 and Spectralink DECTMedia Resources.
Server Appearance and Components
Below you will find a description of the Spectralink IP-DECT Server 6500 appearance and com-
ponents:
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide