SpectraLink IP-DECT 200 - Configuring Certificates; Handling Host and;or CA Certificates

14215700-IG, Edition 8.0
April 2018, Original document
116
Configuring Certificates
If using TLS as SIP transport method, it is necessary to import aCA certificate into the Spectralink
IP-DECT/DECT Server from the web based Administration Page of the server. If using the trusted
server functionality in a Lync/SfB environment or using TLS SIP transports in a Cisco Unified CM
environment it is also necessary to import a host certificate.
Installing a host certificate also eliminates browser security warnings when accessing the web based
Administration Page.
Handling Host and/or CA Certificates
1. Click Configuration, and then click Certificates.
2. On the Certificate chain page, enter the following data:
Field
Certificates - Device certificate chain
Overview of device certificates. These are non-change-
able.
Examples of device certificates are: Device certificate,
SpectraLink Issuing CA / Spectralink Inc. and Spec-
traLink Root CA / Spectralink Inc.
Certificates - Host certificate chain
Certificate file Click Browse to find the relevant host certificate file (*.crt
file).
Key file Click Browse to find the relevant key file (*.pem file).
Password (Optional) Enter a password.
Type Select between the following certificate types; X.509 or
PKCS#12.
Click Import Certificate, if you want to import the cer-
tificate.
Click Remove, if you want to remove a certificate.
Certificates - CA certificates
Click Browse to find the relevant CA certificate file
(*.pem file). E.g. a custom list of CA certificate files.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide