14215700-IG, Edition 8.0
April 2018, Original document
252
Field Setting
Device - User
Username / Extension If the handset is linked to a specific user, the text field will hold
the extension number of that user and the Username / Exten-
sion link is active.
Note: Clicking on the link will take you to the User profile of the
linked handset.
If the user is not linked to a handset, the link is inactive and there
is no extension number in the text field.
Displayname (Optional) After creation of user, this field will contain information about
user name (e.g. caller ID).
E.g. John Doe in John
Doe<sip:1234@example.org>
Users - List User - Handset firmware update
Field Setting
Handset firmware update - Options
Update load Select relevant upload capacity. The load corresponds to the
number of maximum simultaneous updates.
Possible values: Low, Medium or High.
Default value: Medium
Start time Default value: Now
If you want to upload later, select an appropriate time within
the next 24 hours.
Firmware file The firmware file can be either a previously uploaded default
firmware file, or a new firmware file chosen. A new firmware
file must be a valid firmware file with the extension .bin.
Select either Default or Upload.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide
To Next Page
Loading...
