Field Setting
Filter (Optional) Enter the filter used for the LDAP query. The (objectClass-
s=person) filter can be used successfully in most cases.
Attributes Enter the LDAP attributes you want to query the LDAP for, sep-
arated by a comma.
E.g. displayName,telephoneNumber, mobile.
Number attributes (Optional) Enter LDAP attributes that will be used to dial.
E.g. telephoneNumber,mobile.
Attributes names (Optional) Enter the attribute names you want to assign to the attributes
specified above, separated by a comma.
E.g. Name,Phone,Mobile.
Replace prefixes (Optional) Enter the phone number prefixes to replace or strip, separated
by a comma.
E.g.: if the phone number is +45678912345, and that user has
the extension 12345, then you specify “+456789” in the
Replace prefixes field. Or if the phone number is
“+456789123456” and “06789123456” must be dialled, then
specify “+45=0”.
Load interval Enter the interval in seconds for querying the LDAP server for
updates.
Default value: 3600 sec
Possible values: 60 – 999999 sec
Field Setting
System Backup - Backup
Full system backup Click Save. A full system backup is performed and saved.
System Backup - Restore
Full system restore Click Browse to browse for the relevant backup file, and then
click Restore.
To Next Page
Loading...
