SpectraLink IP-DECT 200 - Page 207

14215700-IG, Edition 8.0
April 2018, Original document
207
Field
Enable Long-Press Key3 - Phone-
book (Optional)
If enabled, allow DECT Server to use this long key
press for phone book.
Enable Long-Press Key4 - Phone-
book (Optional)
If enabled, allow DECT Server to use this long key
press for phone book.
Enable Long-Press Key5 - Phone-
book (Optional)
If enabled, allow DECT Server to use this long key
press for phone book.
Enable Long-Press Key6 -
Undefined (Optional)
If enabled, allow DECT Server to use this long key
press.
Enable Long-Press Key7 -
Undefined (Optional)
If enabled, allow DECT Server to use this long key
press.
Enable Long-Press Key8 -
Undefined (Optional)
If enabled, allow DECT Server to use this long key
press.
Enable Long-Press Key9 - Hand-
set Sharing
(Optional)
If enabled, allow DECT Server to use this long key
press for handset sharing.
For more information, see "Handset Sharing" on
page197 and "User Sign-in/Sign-out" on page201.
4. Click Save.
Enable Handset Login on Spectralink DECT Handset
The Handset Login feature can be invoked in two ways:
l By utilizing MSF function number 9, either from the handset main menu or by long-pressing
the '9' key (not supported by Handset 7502). Long-press must be enabled in the Settings >
Advanced > Long Key menu. For more information, see Handset User Guides.
l Through the shortcut menu using the Sign in/out shortcut. For more information, see Handset
User Guides.
When invoking the Handset Login feature, a menu is presented allowing the user to select signing in
with either extension and PIN (if configured) or with user name and password. Entering the required
credentials will allow the Spectralink IP-DECT Server to connect the user to the Call handler and the
handset will be ready for use.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide