Field Setting
Scope (Optional) Scope of syslog settings.
If set to all, the settings will override any local settings on e.g.
connected base stations.
If set to server only, these settings will only apply to the server.
If set to server and mr, these settings will only apply to the
server and media resource.
Default value: all
General Configuration - SNMP
Enabled (Optional) If enabled, access to the SNMP is allowed, and the server will
respond to SNMP requests.
Community (Optional) SNMP Community name (public). The server will respond to
requests from a manager in this community.
Trap host (Optional) Address of SNMP trap host to which SNMP traps are sent.
Trap community (Optional) SNMP trap Community name used for sending traps.
System location (Optional) Information about the physical location of this host.
E.g. telephone closet, 3rd floor
System contact (Optional) The textual identification of the contact person for this host,
together with information about how to contact them.
To Next Page
Loading...
