Field Setting
Server (Optional) Enter the IP address of the NTP server from which the system
will obtain the current time.
Timezone (Optional) Select the wanted time zone. The time zones include daylight
saving times.
Posix timezone string (Optional) Customized time zone setting. The string must be in POSIX
time zone format.
General Configuration - UPnP
Enabled (Optional) Enabled by default. If enabled, the device is UPnP dis-
coverable.
UPnP is an acronym for Universal Plug and Play. If the IP
address of the device is unknown (e.g. forgotten or DHCP-
assigned), UPnP can be used to easily identify the IP address
of the device.
Note: If My Network Places in Windows is setup to show
icons for networked UPnP devices, every Spectralink IP-DECT
Server, Media resource and Base station will be present in My
Network Places.
Broadcast announcements
(Optional)
Specifies if UPnP announcements are broadcasted.
If enabled, the device broadcasts announcements auto-
matically.
General Configuration - Remote syslog
Host (Optional) Enter the host or IP address of the remote syslog server.
If specified, messages will be sent to the server.
Port Server port used for remote syslog.
Default value: 514
Facility Remote syslog facilities used for log messages.
Default value: Local 0
Refer to RFC5424.
Level Log level to send via syslog.
Possible values: emergency. critical, error, warning, notice,
info or debug.
Default value:Info
To Next Page
Loading...
