Field
New password again (Optional) Confirm password required to access the application
interface.
Enable MSF (Optional) If enabled, access to the MSF application interface is
supported.
Default value: Disabled
Enable XML-RPC (Optional) If enabled, access to the XML-RPC application inter-
face is supported.
Default value: Disabled
Internal messaging (Optional) If enabled, internal messaging to allow handset-to-
handset messaging without an external application is
suported.
Wireless Server Configuration - Feature codes
Enable (Optional) If enabled, feature codes for controlling features from
the handsets can be used.
Call forward unconditional - enable
(Optional)
Enable call forward unconditional by dialing this code
(*21*), including the desired extension.
E.g.: *21*$#
Note: It is possible to change the code *21* on the
Spectralink IP-DECT Server to fit your standard. For
more information, see the relevant documentation
available at http://support.spectralink.com/.
Call forward unconditional - dis-
able (Optional)
Disable call forward unconditional by dialing this code
(#21#).
Wireless Server Configuration - Languages
Phone Language (Optional) Language of system messages displayed in handset.
Select the desired language from the list.
Wireless Server Configuration - MSF
Enable Long-Press Key0 - Phone-
book (Optional)
If enabled, allow DECT Server to use this long key
press for phone book.
Enable Long-Press Key1- Phone-
book (Optional)
If enabled, allow DECT Server to use this long key
press for phone book.
To Next Page
Loading...
