SpectraLink IP-DECT 200 - Page 205

14215700-IG, Edition 8.0
April 2018, Original document
205
Field
LAN sync type of service (TOS/Diff-
serv)
(Only visible if license loaded)
TOS/DiffServ values can be configured for PTP pack-
ets used for LAN sync. The values are entered in
decimal.
Network priority: Packets with higher TOS/DiffServ
have higher priority on the network.
184 = critical (highest priority)
96 = flash
64 = immediate
32 = priority
0 = routine (lowest priority)
Default value: 184 (Expedited Forwarding)
Wireless Server Configuration - Handsets (Not relevant to the Spectralink IP-DECT
Server 200.
Handset sharing (Optional)
(Only visible if license loaded)
Enabled by default when Handset Sharing License is
loaded.
Disable this, if handset sharing is not to be allowed.
For more information about using handset sharing and
configuring handset login, see "Handset Sharing" on
page197.
Handset login
(Only visible if Lync/SfB + Security
(TLS, SRTP) License is loaded)
If enabled, user credentials can be entered on the
handset and no user configuration is required on the
server. Use long key press 9 to login. (System depend-
ant).
For more information, see "Configuring Handset
Login" on page202 and Handset User Guides.
Wireless Server Configuration - Application interface
Username Enter username required to access the application
interface.
Max. length: 31 characters.
New password (Optional) Enter password required to access the application
interface.
Max. length: 31 characters.
Spectralink IP-DECT Server 200/400/6500 Installation and Configuration Guide