Field Setting
SIP Configuration - Proxies
Proxies (Optional) Priority: The priority for using this proxy.
Possible Value 1-4.
Weight: The weight for using this proxy if more proxies have
the same priority.
Possible value 1 - 65.000 higher weight gives priority.
Default value: 100
URI: The URI or IP address of the proxy
SIP Configuration - Authentication
Default user (Optional) Default user name used for SIP authentication.
Note: If no handset specific authentication user name/-
password is configured, handsets registered on theSpec-
tralink IP-DECT/DECT Server will use the default user
name/password.
Default password (Optional) Enter password.
Realm (Optional) The realm presented by the proxy when requesting authen-
tication. If this field is non-empty, authentication passwords
will be encrypted.
Note: When the realm is changed, all stored SIP passwords
will be invalid.
SIP Configuration - DTMF signalling
Send as RTP (Optional) If enabled, keypad signaling will be sent as RTP event codes.
Offered RFC2833 payload type Default value: 96
Send as SIP INFO (Optional) If enabled, keypad signalling will be sent as SIP INFO mes-
sages.
Tone duration(msec) Enter the time length of the tone in milliseconds.
Default value: 270 msec
SIP Configuration - Message waiting indication
Enable indication (Optional) If enabled, MWI is displayed in the handset.
Enable subscription (Optional) If enabled, you can subscribe to MWI indications from the
SIP proxy.
To Next Page
Loading...
