Field Setting
Include lifetime in SDES offers
(Only visible if Security (TLS,
SRTP) License is loaded)
(Optional)
Handles the RFC 4568 SRTP lifetime key parameter in SDP
offers.
Default value: Disabled
Include MKI in SDES offers (Only
visible if Security (TLS, SRTP)
License is loaded) (Optional)
Handles the RFC 4568 SRTP Master Key Index Parameter
in SDP offers.
Default value: Disabled
Enable ICE (Optional) If enabled, support for Interactive Connectivity Establishment
(ICE) (RFC 5245) is allowed.
Enable TURN (Optional) If enabled, support for Traversal Using Relays around NAT
(TURN) (RFC 5766) is allowed.
TURN server (Optional) Enter TURN server address.
TURN username (Optional) Enter TURN server username.
If left blank, the per-user authentication username will be
used.
TURN password (Optional) Enter TURN pass word.
If left blank, the per-user authentication password will be
used.
SIP Configuration - Call status
Play on-hold tone (Optional) If enabled, on-hold tone is received in remote end when
placed on hold.
Note: This might conflict with Music-on-Hold.
Provide Music-on-Hold (Optional) If enabled, Music-on-Hold is played for the remote end.
Display status messages
(Optional)
If enabled, call status messages are received in the handset.
'#' key ends overlap dialing
(Optional)
If enabled, pressing the # key dials number in overlap dialing.
Call waiting (Optional) If enabled, call waiting is supported.
To Next Page
Loading...
