SpectraLink IP-DECT 200 - Page 5

Server and Media Resource Reset Button 57
Resetting or Restarting the Spectralink IP-DECT Server and Spectralink
DECTMedia Resource 57
Mounting in aRack 57
Adding Aditional Spectralink DECTMedia Resources 58
How to Add a Spectralink DECTMedia Resource 59
Installing the Spectralink IP-DECT Base Station 62
Power Requirements for the Base Station 62
Base Station Appearance and Components 63
Base Station LED Indicators 65
Front Cover 65
LAN Port on Face Plate 65
Base Station Reset Button 65
Mounting the Base Station 66
Wall Mounted (Vertical) Installation RF Coverage 66
Installing the Spectralink DECT Repeater 68
Repeater Appearance and Components 69
Repeater LED Indicators 70
Front Cover 70
Site Installation Considerations 70
Environmental Considerations 70
How to Wall Mount the Repeater 71
Programming a Spectralink DECT Repeater with the Repeater Pro-
gramming Kit 72
Content of the Spectralink Repeater Programming Kit 72
Set up of the Hardware for Repeater Programming 72
Programming the Spectralink DECT Repeater with the Handset and Repeater
Management Tool 73
Numbering of Base Stations/Server 200/400 and Repeaters in a Normal Con-
figuration 74
Numbering of Repeaters in a Repeater Daisy Chain Configuration 75
Using the Spectralink DECT Repeater With ExternalAntenna 76
Alternative Synchronization Ways 77
Technical Specifications - External Antenna 77
14215700-IG, Edition 8.0
April 2018, Original document