Field Setting
Level Log level to send via syslog.
Possible values: emergency. critical, error, warning,
notice, info or debug.
Default value:Info
Scope (Optional) Scope of syslog settings.
If set to all, the settings will override any local settings on
e.g. connected base stations.
If set to server only, these settings will only apply to the
server.
If set to server and mr, these settings will only apply to
the server and media resource.
Default value: all
General Configuration - SNMP
Enabled (Optional) If enabled, access to the SNMP is allowed, and the
server will respond to SNMP requests.
Community (Optional) SNMP Community name (public). The server will
respond to requests from a manager in this community.
Trap host (Optional) Address of SNMP trap host to which SNMP traps are
sent.
Trap community (Optional) SNMP trap Community name used for sending traps.
System location (Optional) Information about the physical location of this host.
E.g. telephone closet, 3rd floor
System contact (Optional) The textual identification of the contact person for this
host, together with information about how to contact
them.
3. Click Save.
To Next Page
Loading...
