5 - 10 DS7708 2D Vertical Slot Scanner Product Reference Guide
JPEG Target File Size
SSI # F1h, 31h
Parameter # 561
Type: Word
Range: 5-350
This parameter defines the target JPEG file size in terms 1 Kilobytes (
1024 bytes). The default value is 160 kB
which represents 160 Kilobytes.
To set the JPEG Target File Size parameter, scan JPEG Ta
rget File Size below followed by three numeric bar
codes representing the value. Leading zeros are required. For example, to set an image file size value of 99,
scan 0, 9, 9 in Appendix G, NUMERIC BAR CODES.
JPEG Target File Size
(3 digits)
CAUTION JPEG compress may take 10 to 15 seconds based on the amount of information in the target image.
Scanning JPEG Quality Selector (default setting) on page 5-9 produces a compressed image that is
consistent in quality and compression time.
To Next Page
Loading...
