Symbol DS7708 - Convert UPC-E to UPC-A

12 - 38 DS7708 2D Vertical Slot Scanner Product Reference Guide
Convert UPC-E to UPC-A
SSI # 25h
Parameter # 37
Enable this to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After
conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble,
Check Digit).
Disable this to transmit UPC-E decoded data as UPC-E
data, without conversion.
Options:
• Convert UPC-E to UPC-A (Enable)
• *Do Not Convert UPC-E to UPC-A (Disable).
Convert UPC-E to UPC-A (Enable)
(01h)
*Do Not Convert UPC-E to UPC-A (Disable)
(00h)