Symbol DS7708 - Stop Bits

10 - 18 DS7708 2D Vertical Slot Scanner Product Reference Guide
Stop Bits
SSI # 9Dh
Parameter # 157
The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving (host) device for the next character in the serial data stream. Set the number of stop bits
(one or two) to match host device requirements.
Options:
• *1 Stop Bit
• 2 Stop Bits.
*1 Stop Bit
(01h)
2 S
top Bits
(02h)