CHAPTER 14 123SCAN2
Introduction
123Scan² is an easy-to-use, PC-based software tool that enables the quick and easy setup of Zebra scanners.
123Scan² uses a wizard tool to guide users through a streamlined set up process. Once parameters are set,
the values ar
e saved to a configuration file that can be distributed via e-mail, electronically downloaded via a
USB or RS-232 cable, or used to generate a sheet of programming bar codes that can be scanned. 123Scan²
can generate multiple reports that can be easily re-branded using Microsoft Word or Access. Report options
include programmed parameters, asset tracking information and proof of scanner output.
Additionally, 123Scan² can display scanned bar code data includ
ing non-pr
intable characters. It can display,
optimize and save pictures from an imaging scanner. It can also upgrade scanner firmware, automatically
check online to enable support for newly released products, generate a single 2D bar code for one scan
programming and stage large numbers of scanners simultaneously via USB hub(s).
Communication with 123Scan
2
To communicate with the 123Scan² program which runs on a host computer running a Windows XP SP2,
Windows 7, and Windows 8 operating system, use a USB cable to connect the scanner to the host computer
(see Connecting a USB Interface on page 6-2).
To Next Page
Loading...
