Symbol DS7708 - ISBT Concatenation Redundancy

12 - 54 DS7708 2D Vertical Slot Scanner Product Reference Guide
ISBT Concatenation Redundancy
SSI # DFh
Parameter # 223
If you set ISBT Concatenation to Autodiscriminate, use this parameter to set the number of times the
scanner must decode an ISBT symbol before determining that there is no additional symbol.
Scan the bar code below, then scan two numeric bar codes in Appendix G, NUMERIC BAR CODES to set a
value between 2 and 20. Enter a leading zero for single digit numbers. To correct an error or change a
selection, scan Canc
el on page G-10. The default is 10.
ISBT Concatenation Redundancy