OCR PROGRAMMING 13 - 15
Enable/Disable MICR E13B
SSI # F1h AAh
Parameter # 682
To enable or disable MICR E13B, scan one of the following bar codes.
MICR E 13B uses the following characters:
TOAD characters (Transit, On Us, Amount, and Dash) output as the fo
llowing representative characters:
outputs as
t
outputs as a
outputs as o
outputs as d
Enable MICR E13B
*Disable MICR E13B
NOTE OCR is not as secure as a bar code. To decrease OCR misdecodes and speed OCR reading, set an
accurate OCR template and character subset, and use a check digit. See OCR Subset on page 13-23 and
OCR Template on page 13-25.
NOTE All OCR fonts are disabled by default. Enabling OCR can slow bar code decoding. Enabling more than
one OCR font could also slow OCR decoding and impact OCR decoding accuracy.
To Next Page
Loading...
