Symbol DS7708 - Convert UPC-E1 to UPC-A

SYMBOLOGIES 12 - 39
Convert UPC-E1 to UPC-A
SSI # 26h
Parameter # 38
Enable this to convert UPC-E1 decoded data to UPC-A format before transmission. After conversion, the data
follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit).
Disable this to transmit UPC-E1 decoded data as UPC-E1 data, without conversion.
Options:
• Convert UPC-E1 to UPC-A (Enable)
• *Do Not Convert UPC-E1 to UPC-A (Disable).
Convert UPC-E1 to UPC-A (Enable)
(01h)
*Do Not Convert UPC-E1 to UPC-A (Disable)
(00h)