Symbol DS7708 - Prefix;Suffix Values

USER PREFERENCES & MISCELLANEOUS OPTIONS 4 - 29
Prefix/Suffix Values
Key Category SSI # P = 63h, S1 = 62h, S2 = 64h
Decimal Value SSI # P = 69h, S1 = 68h, S2 = 6Ah
Key Category Parameter # P = 99, S1 = 98, S2 = 100
Decimal Value Parameter # P = 105, S1 = 104, S2 = 106
You can append a prefix and/or one or two suffixes to scan data for use in data editing. To set a value for a
prefix or suffix, scan a four-digit number (i.e., four bar codes from Appendix G, NUMERIC BAR CODES) that
corresponds to that value. See ASCII Character Set for USB on page 6-33 and ASCII Character Set for
RS-232 on page 7-37 for the four-digit codes.
When using host commands to set the prefix or suffix, set the
key catego
ry parameter to 1, then set the 3-digit
decimal value.
To correct an error or change a selection, scan Cancel on page G-10.
Options:
• Scan Prefix
• Scan Suffix 1
• Scan Suffix 2
• Data Format Cancel.
Scan Prefix
(07h)
NOTE To use Prefix/Suffix values, first set the Scan Data Transmission Format on page 4-32.