USB INTERFACE 6 - 13
USB Ignore Unknown Characters
This option applies only to the HID Keyboard Emulation device and IBM device. Unknown characters are
characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all
bar code data is sent except for unknown characters, and no error beeps sound. When Do Not Send Bar
Codes With Unknown Characters is selected, bar codes containing at least one unknown character are not
sent to the host, and an error beep sounds.
Options:
•
*Send Bar Codes With Unknown Characters
•
Do Not Send Bar Codes With Unknown Characters.
*Send Bar Codes With Unknown Charac
ters
Do Not Send Bar Codes With Unknown Characters
To Next Page
Loading...
