Symbol DS7708 - Host Serial Response Timeout

10 - 22 DS7708 2D Vertical Slot Scanner Product Reference Guide
Host Serial Response Timeout
SSI # 9Bh
Parameter # 155
This parameter specifies how long the decoder waits for an ACK or NAK before resending. Also, if the decoder
wants to send, and the host has already been granted permission to send, the decoder waits for the
designated time-out before declaring an error.
To set the delay period (options are 2, 5, 7.5, or 9,9 seconds), scan one of the following bar codes.
Options:
• *Low - 2 Seconds
• Medium - 5 Seconds
• High - 7.5 Seconds
• Maximum - 9.9 Seconds.
*Low - 2 Seconds
(14h)
Me
dium - 5 Seconds
(32h)
NOTE Other values are available via SSI command.